NUPLEX SURECOTE

Nuplex Surecote 500 is a seamless, textured slip resistant, medium to heavy duty flooring system incorporating various resins and aggregate options to suit environmental and slip resistant requirements. Surecote 500 is applied to prepared and primed floors using a resin / aggregate slurry followed by a broadcast of aggregate method. (Surecote 500 5mm is differentiated from Traxite 3mm in that in Surecote 500 a heavy slurry is made, trowelled and then over-broadcast. Traxite is rolled resin only followed by broadcast aggregates. Surecote 500 will fill more floor variations than Traxite).

TYPICAL PROPERTIES:

	Resin bound
	Resin choice
	Thick film
	Colour choice
	Textured surface
	Single system
	Low odour options
	Granule finish
	Tough
	UV durable options, Exterior suitable
	Co-efficient of friction “wet” (NZS 3661 : 1993) 0.73
	Film thickness 4-5mm
	Adhesion to the substrate 1.5Mpa minimum

RECOMMENDED USES:

	Warehouses		Service bays
	Factories		Carparks /Garages
	Workshops		Cafeterias
	Back of house areas		Amenities
	Fire stations		Covered walkways (antislip)
	Plant rooms		Cool rooms
	Equipment rooms		Commercial laundries